Casablanca – Morocco imported more than 760,000 tonnes of waste and recyclable materials from European countries during the first nine months of 2026, marking a sharp increase ahead of new European Union restrictions scheduled to take effect in May 2027. The expansion was driven primarily by a doubling of iron and steel scrap imports, highlighting the importance of European supplies to Moroccan manufacturing and raising questions about the future availability of raw materials for domestic steel producers.

European exports of waste and recyclable materials to Morocco reached 760,040 tonnes between January and September, an increase of 50.1% compared with the same period in 2025. Their combined value climbed to approximately $267 million, compared with around $170 million a year earlier.

Iron and steel scrap represented by far the largest category, accounting for 534,969 tonnes, up 101% from 266,175 tonnes during the corresponding period last year. Its value reached approximately $179.5 million, an increase of 114%, representing close to 70% of the total value of Morocco’s imports of European waste and recyclable materials.

The increase reflects the importance of scrap metal as an input for the country’s steel sector. Manufacturers use recovered iron and steel in electric arc furnaces to produce reinforcing bars and other steel products, including materials used in construction. Recycled metal can provide an alternative to newly extracted raw materials, although its availability, quality and price remain important factors in determining production costs.

The quarterly figures indicate that the rise in shipments continued throughout the year. Imports increased from approximately 211,000 tonnes in the first quarter to 272,000 tonnes in the second, before reaching around 277,000 tonnes in the third quarter. June recorded the highest monthly volume, with shipments estimated at approximately 120,000 tonnes, while September deliveries reached around 103,400 tonnes.

Iron and steel scrap followed a similar upward pattern. Monthly imports rose from approximately 32,000 tonnes in January to around 104,650 tonnes in June. During the third quarter, monthly volumes generally remained between 65,000 and 82,000 tonnes, indicating that demand for recovered metal remained substantial after the second-quarter increase.

The Netherlands, France, Spain and Belgium were among the main suppliers of iron and steel scrap. Dutch shipments reached 174,510 tonnes, while France supplied 130,298 tonnes and Spain 124,168 tonnes. Belgium accounted for another 49,663 tonnes. These figures underline the concentration of Morocco’s scrap supplies within a relatively small group of European markets.

The broader supplier ranking shows a similar pattern. France exported 217,493 tonnes of waste and recyclable materials to Morocco during the first nine months of 2026, making it the largest supplier. Spain followed with 184,792 tonnes, while the Netherlands shipped 183,156 tonnes, almost five times its volume during the same period of the previous year. Together, the three countries accounted for approximately 77% of total European shipments to Morocco.

Belgian exports increased by 87% to 80,516 tonnes, while Germany supplied 29,462 tonnes. Denmark also recorded a substantial increase, with shipments reaching 24,501 tonnes compared with only 114 tonnes a year earlier. By contrast, deliveries from Poland fell sharply to 6,792 tonnes, down from 83,649 tonnes during the first nine months of 2025.

The composition of imports shows that Morocco’s reliance on European recyclable materials extends beyond the steel sector. Rubber waste reached 105,268 tonnes, although this category recorded a decline of 9.8% compared with the previous year. France supplied 86,732 tonnes, equivalent to approximately 82% of the total. Much of this material consists of processed or ground used tyres, which can be used in industrial applications, including as an alternative fuel in cement production.

Textile-related imports also represented a significant category. Morocco received approximately 56,400 tonnes of used clothing and textile waste. Used garments accounted for 29,353 tonnes, down 11.6%, while textile scraps and other waste reached 27,069 tonnes, almost double the previous year’s volume after increasing by 96%.

Spain was the principal supplier of both categories, exporting 24,517 tonnes of used clothing and 22,551 tonnes of textile waste. These materials feed into activities such as second-hand clothing distribution, sorting, recovery and textile recycling. Their use can reduce the demand for newly produced materials, although the environmental benefits depend on the quality of sorting, the proportion that can be reused and the treatment of material that cannot be recovered.

Imports of broken glass also increased, doubling to 26,035 tonnes. Belgium was the main supplier of this category. Recovered glass can be processed for reuse in manufacturing, reducing the need for some virgin raw materials. Other imported categories included ash and industrial residues, although their combined volumes followed a different trend. Imports of ash and certain industrial residues fell by 46% to 27,246 tonnes.

Copper waste declined by 12.7% to 5,527 tonnes. Germany, Italy and Greece were among the suppliers. Despite the lower volume, the reported value of these imports reached approximately $57 million. The figures point to differences between categories in both their commercial value and their role in industrial production.

The increase in European waste shipments comes as the EU prepares to tighten its rules governing exports of non-hazardous waste to countries outside the Organization for Economic Co-operation and Development (OECD). The new Waste Shipment Regulation is scheduled to apply from May 21, 2027, introducing a system under which exports to non-OECD destinations will generally be restricted unless the receiving country is included on a European Commission list of authorised destinations.

The list is expected to identify the countries eligible to receive specific categories of waste, rather than granting unrestricted access to all recyclable materials. The framework is intended to ensure that exported waste is managed under conditions that meet environmental and regulatory requirements in destination countries.

Morocco has sought to maintain access to European recyclable materials by submitting an application in March 2025 covering several categories of recoverable waste. The country subsequently provided additional information in November 2025 and January 2026 as part of the assessment process.

European authorities have sought further details concerning Morocco’s capacity to process metallic waste, monitor pollution and emissions, and manage environmental risks linked to the storage, transport and treatment of scrap. These requirements are particularly relevant for materials such as iron and steel waste, given the volumes involved and the potential environmental effects of inadequate handling.

Preliminary assessments have suggested that Morocco could remain eligible to receive certain categories, including used textiles and tyres. However, the expected authorisations for these materials do not necessarily extend to all metallic waste. Iron and steel scrap remains a particular concern for Moroccan manufacturers because of the scale of imports and the importance of these supplies to local production.

The final decision has not yet been settled, and the European Commission’s assessment remains subject to further information and regulatory procedures. The categories ultimately authorised could therefore differ from preliminary indications. For Moroccan companies, uncertainty over the treatment of ferrous scrap makes the coming months important for procurement planning.

If European restrictions prevent or limit exports of iron and steel scrap to Morocco, domestic manufacturers could face pressure to find alternative suppliers. This may involve sourcing recovered metal from other international markets, negotiating new supply agreements and expanding domestic collection and recycling capacity. Such adjustments would require companies to assess transport expenses, material quality, available volumes and the reliability of alternative suppliers.

Expanding domestic scrap collection could also become more important. Morocco would need efficient systems for gathering, sorting and processing discarded metal from construction, manufacturing, vehicles and other activities. Greater recovery of locally generated materials could reduce dependence on imported supplies over time, although building sufficient collection and processing capacity would require investment and coordination across the recycling chain.

The increase in imports during 2026 has also prompted questions about whether industrial operators are securing supplies ahead of the new European rules. The possibility of precautionary purchasing cannot be excluded, particularly given the concentration of imports in iron and steel scrap. However, the available trade figures do not establish that companies have deliberately accumulated inventories in anticipation of the restrictions. Rising industrial demand and the need to maintain production supplies may also explain part of the increase.

For Morocco, the issue extends beyond waste management and environmental regulation. European recyclable materials have become an important source of industrial inputs, particularly for steel production, while other categories support activities in textiles, cement, glass and metal processing. Any change in access to these supplies could affect procurement costs and production planning across several sectors.

The coming European decisions will therefore have implications for both Morocco’s recycling activities and its industrial supply chains. The extent of the impact will depend on which categories are authorised, the conditions attached to their importation and the ability of Moroccan companies to diversify their sources. With iron and steel scrap accounting for the largest share of current shipments, its regulatory status is likely to be one of the most closely watched elements of the new framework.