Casablanca – Spanish ferry operator Baleària is moving closer to introducing fully electric maritime transport between Spain and Morocco after the first of two new electric fast ferries was floated at the shipyards in Gijón, northern Spain, on October 25, 2026. The vessel is designed to operate on the Tarifa–Tangier City route, with commercial service planned for summer 2027. The project forms part of the company’s efforts to reduce maritime emissions and expand the use of electric propulsion in passenger and vehicle transport across the Strait of Gibraltar.
The investment exceeds $230 million and covers the construction of two catamarans equipped with electric propulsion systems and large battery packs. The second vessel is still under construction and is expected to join the fleet after summer 2027. Once both ferries enter service, the company intends to establish a fully electric connection between the Spanish port of Tarifa and Tangier City, offering an alternative to conventional vessels that rely on fossil fuels.
The project reflects a broader shift in maritime transport as operators face growing pressure to reduce emissions, improve energy efficiency and modernize their fleets. Short-distance ferry routes are among the services being considered for electrification because their relatively limited sailing distances can make battery-powered operations more practical than on longer international journeys.
The Tarifa–Tangier City connection is particularly suited to this approach because the two ports are separated by a short crossing of the Strait of Gibraltar. However, operating electric ferries requires more than replacing conventional engines with batteries. Port infrastructure, charging capacity, vessel schedules and energy management must be coordinated to ensure that ships can complete their journeys and recharge within the time available between departures.
The new catamarans will each measure 87 meters in length and feature aluminum hulls designed for high-speed passenger and vehicle transport. Each vessel will have a battery capacity of 14 megawatt-hours, supplying the energy needed for electric propulsion and onboard systems. The vessels are being developed specifically for the route, with their technical configuration intended to support frequent crossings while reducing the environmental impact of operations.
Unlike conventional ferries that burn fuel during navigation, the new vessels are designed to operate using electricity stored in their batteries. This is expected to eliminate direct exhaust emissions during normal electric operation and reduce engine noise and vibrations. The environmental benefits will also depend on how the electricity used to charge the batteries is generated, as well as on the efficiency of port operations and the wider energy supply system.
The transition will require charging facilities at both Tarifa and Tangier City. These installations must provide sufficient power to replenish the batteries during turnaround periods without disrupting the ferry timetable. Their development is therefore an essential part of the project, since the vessels’ operational performance will depend on the ability to charge reliably between crossings.
The ports will need to coordinate charging systems with arrival and departure schedules, passenger movements and vehicle loading. For a high-frequency service, charging time is particularly important because delays could affect subsequent departures. The design of the infrastructure will also need to account for electricity demand, safety requirements and the long-term maintenance of the equipment.
The first ferry’s floating operation marks an important stage in its construction, but it does not mean that the vessel is ready to enter commercial service. The ship must undergo further work, including interior outfitting, installation and testing of onboard systems, commissioning and sea trials. These steps will verify that the vessel meets technical and operational requirements before it is delivered and prepared for service.
The construction process has also progressed on the second catamaran. The dry dock at the shipyard can accommodate one complete vessel and part of another, allowing work on both projects to advance within the same facility. During the first ferry’s floating operation, the structure of the second vessel also became buoyant but remained in place. The dry dock will subsequently be drained so that construction of the second ship can continue.
The two-vessel order represents a significant project for the shipbuilding sector. The first catamaran is the fifth vessel built at the shipyard for Baleària, reflecting an established working relationship between the companies. The project also demonstrates the role of specialized shipyards in developing new vessel designs as maritime operators explore alternatives to conventional propulsion.
Construction activity is expected to support employment across the shipyard and its supply chain. Depending on the stage of work, the project is expected to involve more than 300 direct jobs per day at the shipyard. This figure refers to the workforce engaged in construction activity at different stages rather than to a permanent workforce of that size. Additional indirect employment may arise through suppliers, equipment manufacturers, technical services and other businesses involved in the project.
The development of electric vessels requires expertise in several fields, including naval architecture, battery systems, electrical engineering, propulsion technology and onboard energy management. It also creates demand for equipment and services related to charging infrastructure and the maintenance of high-capacity batteries. The extent to which these activities generate lasting economic benefits will depend on the involvement of local suppliers, the skills required for operation and maintenance, and the development of supporting services in both countries.
For Baleària, the project forms part of a wider strategy to reduce the environmental footprint of maritime transport. The company has set a target of achieving net-zero emissions by 2050, making fleet renewal and the adoption of alternative propulsion systems relevant to its longer-term investment plans. The planned electric connection between Europe and Africa in 2027 would represent a practical application of that strategy on a short international route.
The project also gives the shipbuilding sector an opportunity to apply existing technical capabilities to vessels designed around electric propulsion. Constructing two ships for the same route allows the companies involved to develop a repeatable design and operational model rather than relying on a single demonstration vessel. Experience gained during construction, testing and initial commercial operations could inform future projects involving battery-powered passenger transport.
The introduction of electric ferries could also influence the passenger experience. Electric propulsion generally produces less noise and vibration than conventional diesel engines, potentially making crossings quieter. The vessels will continue to perform the same basic transport function as existing ferries, carrying passengers and vehicles between the two ports, but their propulsion systems and charging requirements will change how the service is operated.
The project nevertheless faces practical challenges. Battery-powered ferries require substantial upfront investment, reliable charging infrastructure and careful management of energy consumption. Battery performance, maintenance costs, charging schedules and electricity prices will all influence operating expenses over time. The commercial case will therefore depend on whether these costs can be balanced against fuel savings, maintenance requirements and the benefits of lower direct emissions.
The environmental performance of the service will also depend on the electricity supply used to recharge the vessels. Charging with electricity generated from renewable sources would strengthen the emissions reductions, while electricity produced from fossil fuels would reduce the overall benefit. Both ports’ infrastructure plans and their access to reliable, lower-carbon electricity will therefore be important to the project’s long-term results.
The route could provide a practical example of how electrification may be applied to short maritime connections where vessels operate on repeated schedules and return regularly to equipped ports. It may also offer operational lessons for other ferry services considering battery-powered vessels, particularly those linking nearby destinations and carrying a combination of passengers and vehicles.
The planned service comes as maritime operators and port authorities examine ways to reduce the environmental impact of shipping while maintaining reliable transport links. The Strait of Gibraltar is an important corridor for movement between Europe and North Africa, and ferry services contribute to passenger mobility, tourism and road transport connections. Introducing electric vessels on this route would place new requirements on port operations while providing an opportunity to test the commercial application of battery propulsion in a busy cross-border setting.
The first catamaran’s launch from the dry dock brings the project closer to its planned start, although further construction and testing remain necessary before passengers can board the vessel. The second ferry will follow on a separate schedule, with both ships intended to support the planned electric service. Their eventual performance will depend on the completion of port charging facilities, the reliability of the battery systems and the ability to maintain regular crossings.
If the timetable is maintained, the Tarifa–Tangier City connection could become a significant application of electric propulsion in passenger and vehicle ferry transport between Spain and Morocco. Its results will help determine whether the combination of battery-powered vessels, dedicated charging infrastructure and short-distance operations can provide a commercially viable way to reduce direct emissions on other maritime routes.
















